|
Up for consideration is a Korby
Audio Technologies Power Supply Unit for the AKG C-12
and C-12VR tube microphones. Korby's mics, mic mods, and
PSUs can be found in dozens of top recording studios, and are
in widespread use by today's greatest recording artists. This
PSU makes an excellent replacement for either a defunct vintage
C-12 PSU, as well as a replacement for the stock AKG C-12VR PSU
-- which has a reputation for being particularly awful. New replacement
PSUs cost $250 - $450 so here is your chance to pick up a professional
C-12 style 6072a tube PSU and save a couple hundred bucks!!!
SPECS:
* Polar Patterns: Omni, Cardioid, Fig. 8
* Serial Number: 5219
* Input Connector: 5-pin Tuchel/DIN
* Output Connector: XLR
* 110 AC Power
HI -RES PHOTOS:
PSU Top 1
/ 2
PSU Side
CONDITION
This PSU is in good condition, with minor scratches from
normal use. This PSU came with my AKG
C12VR which was recently converted into a C-12VRX
by Oliver Archut, and it came to me complete with a new
AMI TAB Funkenwerk
PSU. The Korby PSU will properly power any 12V tube C12-style
tube mic. I understand that Korby Technologoes originally made
just two kinds of PSU models, a 6 volt model and a 12 volt model.
This unit powers all the 12 volt tube mics, such as the C-12
and the C-12VR and their 6072a tube cloned offsprings.
SHIPPING & TERMS
USA shipping is $9.50 via FexEd Ground, and optional insurance.
All sales are final, so please ask questions first. Guaranteed
not to be DOA, but it may need to be set up by a qualified mic
tech if you are using it on a mic other than the C-12 / C-12VR.
I do accept PayPal. Thanks for looking. This auction is for one
Korby PSU for C-12 type tube microphones, and hardwired
AC cable. No other accessories are included.
PLEASE CHECK OUT
my other Pro Audio gear for sale in Current
eBay Auctions, and also see some of my gear that has Recently Sold on eBay.
|
Power Supply Unit for AKG C-12 & C-12VR
